How to Type a Fraction on a MAC - [ Pages ]

How to type a Fraction on a MAC

In this article, you will learn how to type a fraction on a MAC if you are using Pages on Macbook Air or Macbook Pro. You can use the insert equation option in MAC Pages to write the fractions. We will use the "over" or "frac" command to type fractions using MAC keyboard.

Following are the two methods 

Method 1 

1. Open Pages on MAC

2. Go to the "Insert" tab and click "Equation"

3. In the "Edit Equation" windows to type fraction 1/2, type: 1\over2

4. You will see the preview at the bottom of the windows 

5. Click "Insert" to get the fraction in Pages Document

Method 2 

1. Launch Pages and go to the "Insert" tab

2. Click "Equation" to open the "Edit Equation" window

3. To type fraction 1/2 type: \frac{1}{2}

If you still have difficulty following the above two methods watch this youtube video

Read More

How to Put Margin In Google Docs- ( 1-Inch or 1.5-Inch)

 How to Put Margin In Google Docs 

( 1-Inch or 1.5-Inch)

In this article, you will learn an easy method on how to put margin in Google Docs. You may want to set 1 inch or 1.5 inch margin if you are writing a report thesis or an article on a computer or a laptop. You can use the page setup option to set page margins. To change margins in google docs follow the method shown below 

1. Open Google Docs 

2. Go to the "File" menu present at the top left corner 

3. Scroll Down and click on "Page Setup" to open the page settings window 

4. Under apply to select "Whole Document" or "Section" if you have a section 

5. Under "Margins' you can adjust margins at the top, left, right and bottom by entering a number in inches or cm

6. Click on "ok" to change margins in Google Docs

If you have difficulty following the above steps to edit page margins then watch this Youtube Video 

Read Next: How to Change Page Orientation in Google Docs

Read More

 How to Change Page Orientation In Google Docs

In this article, you will know how to change page orientation in Google Docs. There are two easy methods to change the page orientation. Either you can landscape the portrait page or portrait the landscape page in Google docs. Following are the two methods 

Method 1 

1. Open Google Docs Document

2. Clik on the "File" menu 

3. At the bottom of the "File" menu Click "Page Setup" to open the Page Setup windows

4. Under apply to "Select Whole Document"

5. Under the "Orientation" option Select "Landscape" or "Portrait" as required

6. Click "OK" to change Google Docs page orientation

Method 2

1. In Google Docs Click on the "Format" menu 

2. Under the "Format" menu, Click "Orientation" to open the setting windows

3. Under Apply to select "Whole Document"

4. And Under "Orientation" select either "landscape" or "Portrait"

5. Click "OK" to change the page Orientation in Google Docs

If you are finding it difficult to follow the above steps in Gogle Docs watch this youtube video 

Read More

How to type y-Hat Symbol in Word [ ŷ ]

 How to type y Hat Symbol in Word 

In this article, you will learn how to type y hat symbol in Word document. The y hat is a widely used symbol in statistics to present an estimate or predicated value of "y". For example ŷ = estimated response variable. Following are several methods to y hat in Word.

Method 1 Equation Method

1. Open the Microsoft Word document

2. Click on the "Insert" Tab" and then "Equation" to activate the equation box 

3.  Under the "Design" Tab click "Accent" and select "HAT" in the first row 

4. Now type the letter "y" in the dotted box for y hat

Method 2 Symbol or sign method

1. In an MS Word document type the letter "y" on keyboard 

2. Click on the "Insert" Tab" and then "Symbol" ---> "More symbol" 

3.  Under the "Font" select "Normal text" and under "Subset" select "Combining Diacritical Marks"

4. Under the symbol click on the "Combining Circumflex Accent" (^) and click "Insert" to get y hat sign

Method 3 Keyboard Shortcut 

Type Y0302 or y0302 on the keyboard and press Alt + X to write y hat

You can put a hat over any letter using these methods for example beta hat symbol, p hat, q hat, X hat, etc. 

If you have difficulty following the steps watch this youtube video

Read More

How To Type X Bar In Word MAC

In this article, you will know the method to type X bar in Word on MAC. The X bar symbol can be typed using the overbar or an overline option in Microsoft word. The symbol is a statistical symbol often used in mathematics to represent the mean of a set of data. Follow the steps shown below to write the symbol.

1. Open the Word Document

2. Click in the document where you want to insert the mean symbol

3. Go to the Insert tab

4. At the top right corner, Click on "Equation" to insert the equation box

5. At the top right-hand corner click on the "Accent" dropdown and select "Overbar"

6. Click inside the dotted box and type X

In this way, you can easily type overbar over a letter X. Use the same method to type bar over "a" and "e"

If you still have difficulty writing the symbol watch this video

Read Next: How to Make Y Hat Symbol in Word

Read More

How to Write m3 in Word MAC

In this article, you will know the easy method of How to write m3 in Word MAC. The symbol m3 also called cubic meter, a meter cube is a unit of volume. There are several ways to type small number three next to "m". You can use the superscript option or you can also use the keyboard shortcut to type m3 symbol.

Following are the methods 

Normal Method 

1. Open the Word document and click where you want to type m3

2. Now type m3 and select the number three using a mouse or keyboard 

3. At the top left corner below the main menu ribbon you will see the option "X2", "Superscript" option

4. After clicking on the superscript you get the m3 symbol

Keyboard shortcut method 

1. Type m3 in the word document

2. Select the number three and then on the keyboard press CMD SHIFT =

If you still have difficulty following the above two methods then watch this video

Read More

How to Write Degree Sign in Keyboard

In this article, you will know How to Write Degree Sign in Keyboard. There are two shortcuts to type degree symbol in keyboard. If you are writing a scientific research paper, thesis, or a report in which you need to type degree Celsius or degree Fahrenheit then this after reading the article and watching the video you can easily insert the symbol quickly

The following are two easy methods

Method 1

This method is for laptop keyboard without a number pad

1. Open the Word document and click in the word document where you want to insert the symbol

2. Now on your keyboard type 00BA ALT + X and type C or F

Method 2

1. Click inside the Word document

2. Now on a laptop or computer keyboard click "ALT" and hold the ALT key

3. Type 0176 on the numberpad

4. Release the Alt key

These are the two simple methods for writing the degree sign

If you still have difficulty following the above methods then watch is video

Read More

How To Type # In Laptop Keyboard

In this article, you will know how to type # in laptop keyboard. The hashtag symbol ( # ) is widely used on social media websites like Twitter, Youtube, Instagram, etc. There are several methods to type hashtag apart from just using the keyboard.

Follow are the methods

Method 1 to type hashtag on a Laptop or computer keyboard

1. Press "Shift" on the keyboard and hold the shift

2. now Press "3 "on the keyboard and release the "Shift"

This method is only when you want to type hashtag by keyboard only

If the method doesn't work for you then use the second method.

Method 2

1. Go to Google.com and search "hashtag symbol"

2. In the result you will see the symbol, select the symbol and copy the symbol

3. Paste the symbol where you want

Watch the video if you have difficulty typing #

Read More

How To Split Text Into Two Columns In Word

In this article, you will know how to split text into two columns in Word document. If you are writing a research paper or preparing a poster, this method will be very useful for you. While there is a simple method to get two columns in Microsoft Word I won't recommend the first simple one shown below. instead, I will suggest you, use the second method and watch the video.

Following are the methods 

Method 1 

1. Open the Word Document and select the text you want to split into two columns

2. Clik on the "Page Layout" tab

3. Under the "Page Layout" tab click on "Columns" and Click "Two" this will split the page into two  

    columns

Method 2

1. Open the Word Document 

2. Go to the "Insert" Tab => Table and select the 2 X 2 table

3. Now copy-paste the text inside the columns 

4. To remove the Outer Border of the Table, Right Click on the Table Border and Click "Format shapes"

5. Now Under the "Line" option select the "No" line to remove the table outer border

If you still have difficulty following the above steps then watch this video

Read More

How to Make Y Hat Symbol in Word - (Microsoft)

How to Make Y Hat Symbol in Word

In this article, you will know How to Make Y Hat Symbol in Word document. To type hat over a letter in Word you can use the "Equation" and "Accent" option in Microsoft Word. The method is very easy. Let's get started.

Following are the steps required to put hat over a letter in Word

1. Open the Word document 

2. The Click on the "Insert " Tab

3. At the top right corner you will see the option "Equation" click on it and you will see the equation  

    box

4. Now at the top of the main ribbon menu, click on the "Accent" and in the first-row select "hat"

5. Now, click inside the dotted box and type the letter Y on your keyboard 

In this way, you add hat over a letter Y. Use the same method to get X hat symbol as well

If you find it difficult to follow the steps watch this video

Read More

How To Put Line Above X In Word

In this article, you will know how to put line above X in Word document in Microsoft Word. The X bar symbol is also called a mean symbol. It is used in statistics. To type this symbol accent option is used which allows to type overbar.

Following are the steps to type the X bar symbol in Word

1. Open the word document

2. Click on the Insert Tab

3. At the top right-hand corner click on "Equation". After clicking you will see the equation box

4. Now click on "Accent" and Select "Overbar"

5. Click inside the dotted box and type X to get the x bar 

If you have difficulty following the steps watch this video

Read More